What is maximum distance between Audio Touch head unit and Amplifier for Cat5 lead ?

• Related Articles

• Can more than one touch controller work with amplifier?

  No, only one touch controller per amplifier otherwise the system will not function correctly.

• Retrotouch Touch Switch LED Flickering & Load Glow

  If you have installed a Retrotouch Crystal Touch Switch or Dimmer and your LED light bulbs are flickering, pulsing, or faintly glowing even when the switch is turned completely off, this is a common issue known as phantom leakage or low-load ...

• Retrotouch Crystal Touch Switch Sensitivity issue

  Retrotouch Crystal Touch Switches utilize advanced, high-sensitivity capacitive proximity integrated circuits (ICs). These sensors detect the microscopic electrical change (capacitance) generated when a human finger nears the 4mm toughened glass ...

• Where can I install the amplifier?

  The Amplifier can be installed in the loft, cupboard, on the wall. Anywhere inside the home (excluding: bathroom/wet rooms/outside) Nothing must obstrust the amplifier heatsink, as must be clear for airflow.

• Retrotouch Crystal Touch Switch Not Responding

  If your Retrotouch Crystal Touch Switch is completely non-responsive, or if it works flawlessly only when the glass faceplate is removed but stops responding the moment the glass panel is clipped back on, the issue is almost always caused by an ...