How to setup and pair a Touch Wi-Fi switch.
This video will explain how to wire the Wi-Fi touch switch with and without a neutral cable. It will also explain how to pair multiple switches wirelessly for a 2-way connection.
Wiring diagram with a neutral cable
Wiring diagram without a neutral cable
How to add the switch to the network
1. Press and hold the switch button until the LED starts to flash purple
2. Open the SmartLife APP
3. Click the + button
4. Add device
5. Select your switch and input the network info
6. The switch has been added to APP/network
How to pair switches together wirelessly
1. Select the switch you want to be paired
2. Select the edit button
3. Select the Multi control association
4. Select the switch you want to pair with
5. The switches are now paired and can operate 2-way wirelessly
If further help is required, please contact us at support@retrotouch.co.uk
Related Articles
How to wire and setup a Retrotouch Touch Wi-Fi Switch
This video will explain how to wire the Wi-Fi touch switch with and without a neutral cable. It will also explain how to pair multiple switches wirelessly for a 2-way connection. Wiring diagram with a neutral cable Wiring diagram without a neutral ...How to pair Retro Touch touch on/off switches
When pairing our Touch On/Off switches in a 2-way or intermediate circuit, a gang on the slave can only pair with the Master gang in the same position. I.e., L1 on the Master can only pair with L1 on slave(s) and not the L2 or L3. Please note: In ...How to setup the Retrotouch Friends of Hue switch
This is a step by step on how to set up the Retrotouch Hue switch with a Philips Hub. 1. Once connected to your network with the Hue Hub it will say connected. Once, you have connected it will find any lamp on your network. 2. Once a room has been ...User Manual - Crystal Wirefree Touch Switch
Manual - Crystal Wirefree Touch SwitchUser Manual - Crystal Retractive Touch 240v Switch
User Manual - Crystal Retractive Touch 240v Switch